Manufacturer profile

Aptiv distributor & excess inventory

Hybrid Electronics sources Aptiv (formerly Delphi Automotive) connectors, sensors, ADAS controllers, high-voltage EV interconnect, cable-management hardware, and embedded software modules across the company's consolidated portfolio — Packard Electric and Delco Electronics heritage lines (Metri-Pack 150 / 280 / 480 / 630, Weather-Pack, GT 150 / GT 280, Micro64, Ducon), HellermannTyton cable management (TY-RAP T18R / T30R / T50R, Helatag, heat-shrink), KUM Ltd. Korean sealed automotive connectors, Intercable Automotive Solutions HV EV connectors, nuTonomy and Motional autonomous stacks, and Wind River embedded software (VxWorks RTOS, Wind River Linux). Same-day quotes, traceable stock, and OEM-excess sourcing since 1995.

~$20B
Annual revenue (NYSE: APTV)
200K+
Employees worldwide
1899
Packard Electric heritage
Same-day
Quote turnaround

About Aptiv

Aptiv PLC was created in December 2017 when Delphi Automotive PLC split into two publicly traded companies: Aptiv (electrical architecture, active safety, autonomous, connected services, user experience) and Delphi Technologies (powertrain and aftermarket, later acquired by BorgWarner in 2020). The parent's origin traces back to General Motors' internal components divisionsPackard Electric (Warren, Ohio, founded 1890, joined GM 1932, the modern automotive-wire-harness industry's ancestor) and Delco Electronics (Kokomo, Indiana, GM/Hughes electronics heritage) — which GM spun out as Delphi Corporation in 1999. Delphi filed Chapter 11 in 2005, restructured, and re-emerged in 2009 as Delphi Automotive PLC before the 2017 Aptiv split. Aptiv is headquartered in Dublin, Ireland with operational headquarters in Troy, Michigan, trades on the NYSE under APTV, employs roughly 200,000 people, and generates approximately $20 billion in annual revenue. The current line card is the sum of a century of Packard Electric wiring heritage, Delco Electronics semiconductor and sensor development, and an aggressive acquisition roster: KUM Ltd. (2015 — Korean sealed connector manufacturer), HellermannTyton (2015 — global cable management, TY-RAP cable ties, heat-shrink, marking systems), nuTonomy (2017 — Boston/Singapore autonomous-vehicle software), Winchester Electronics engineered connectors (partial), PolyOne engineered materials (partial), Motional (2020 robotaxi JV with Hyundai), Wind River Systems (2022, $4.3B — VxWorks RTOS, Wind River Linux, Titanium Cloud), and Intercable Automotive Solutions (2023 — high-voltage EV connectors). Historic Aptiv product ships under multiple brand identities including Delphi, Packard, Delco, Delphi Packard Electric, and Aptiv Connection Systems. The Elcon PowerBlok / PowerModul heavy-current line was part of Delphi through 2019 before being divested to Kyocera, and legacy Delphi-marked Elcon stock still shows up on defense and industrial power-block RFQs.

Hybrid Electronics has quoted Delphi / Aptiv product continuously since we began sourcing in 1995 — long before the 2017 spin-out, before Wind River joined the family, and back when Metri-Pack, Weather-Pack, and Packard heritage terminals still shipped under Packard Electric part number stampings. Because Aptiv's portfolio was assembled through 125 years of consolidation, buyers still hunt for parts by their historical brand names and legacy PN formats: an aftermarket harness house replacing a Weather-Pack 12010973 two-way male shroud on a 1990s GM chassis does not care that Aptiv now stamps the same part with a different date-code prefix; a heavy-truck EMS specifying a Metri-Pack 280 12065287 or a GT150 15326802 sealed housing needs original Delphi/Packard brand markings on incoming inspection; a motorsports harness builder qualifying an original Delphi Micro64 100-00086 56-way sealed connector wants pre-Aptiv date codes; and an EV integrator qualifying an Intercable HV1M / HV2M high-voltage battery interlock wants the pre-Aptiv Intercable original packaging. We support customers who need discontinued Elcon PowerBlok (pre-Kyocera 2019 transition), pre-2015 KUM sealed automotive connectors, legacy Packard Electric wiring terminals, older Delco Electronics 1990s sensors, pre-Aptiv HellermannTyton IB-branded cable management, and allocated modern Metri-Pack, GT-series, Micro64, HVA/HVB, and TY-RAP when authorized distributors show zero stock or 30-plus week lead times.

Aptiv product families we source

Our line card spans the entire Aptiv portfolio — from current-production Metri-Pack 150 / 280 and GT150 / GT280 shipping into passenger-car and heavy-vehicle harness programs, to allocated Micro64 high-density signal, Intercable HV1M / HV2M battery interconnect for EV programs, HellermannTyton TY-RAP cable ties and Helatag identification, KUM Korean sealed connectors, MPC / RACam ADAS controllers, and Wind River VxWorks board-support packages that Aptiv now bundles with its Smart Vehicle Architecture (SVA) offering.

Metri-Pack 150 series — 1.5mm sealed / unsealed

Metri-Pack 150 is the 1.5mm terminal-system workhorse of automotive signal and low-current wiring — 12047xxx unsealed and 12065xxx sealed housings, 2-way through 24-way, tin- and gold-plated terminals, tangless and locking-lance variants for chassis, body, and powertrain harnesses.

Metri-Pack 280 series — 2.8mm mid-current

Metri-Pack 280 covers the 2.8mm mid-current terminal system — 12160xxx and 12162xxx housings, unsealed and sealed, tangless female terminals (12110845-L), and shared mating geometry with Weather-Pack for legacy compatibility.

Metri-Pack 480 / 630 series — high current

Metri-Pack 480 (4.8mm) and Metri-Pack 630 (6.3mm) high-current terminals for starter, alternator, battery-post, and heavy-vehicle power connections — commonly used with tin-plated stamped-and-formed terminals in ring, blade, and receptacle formats.

Weather-Pack sealed — 12010 / 12015 / 12020 series

Weather-Pack sealed automotive housings — 12010xxx male shrouds (12010973 2-way, 12010996 1-way, 12010975 6-way), 12015xxx female tower assemblies (12015791 1-way, 12015792 2-way), and 12020xxx 4/6-way (12020827) — the pre-Micro64 environmental-sealed workhorse used on decades of GM, Chrysler, and heavy-truck electrical.

GT (Global Terminal) 150 / 280 — 15326 / 15305

GT150 (1.5mm) and GT280 (2.8mm) globally-standardized sealed and unsealed housings — 15326xxx and 15305xxx series, designed for global OE platforms and available in male / female, 2- through 40-way, and combined signal-power geometry.

Micro64 — 0.64mm ultra-high-density signal

Micro64 0.64mm micro-terminal system — ultra-high-density signal interconnect for engine-control modules, transmission controllers, and infotainment. Sealed and unsealed housings up to 64 positions with gold-plated terminals for low-level analog and CAN/LIN networks.

Ducon — high-density signal blocks

Ducon high-density signal connectors used in older Delphi ECU, TCM, and body-controller applications — still called out on legacy GM, Cadillac, and Saab wiring diagrams from the 1990s and 2000s.

Elcon PowerBlok / PowerModul (pre-Kyocera 2019)

Elcon high-current PowerBlok and PowerModul power-block connectors — part of Delphi's line card through 2019 before divestiture to Kyocera. Legacy Delphi-marked Elcon inventory still ships against defense, industrial-drive, and battery-cabinet spares.

HellermannTyton TY-RAP cable ties — T18R / T30R / T50R

T18R (2.5mm, 100mm), T30R (3.5mm, 150mm), and T50R (4.6mm, 200mm) inside-serrated polyamide cable ties in PA66, PA46, PA66HS heat-stabilized, and PA66HIRHS heat/impact grades — the industry-standard bundling ties for automotive, industrial, and telecom harnesses.

HellermannTyton heat-shrink, Helatag, spiral wrap

Helatag self-laminating cable-marking labels, HELAVIA and TULT heat-shrink tubing (2:1 and 3:1 shrink ratios), SBPE spiral wrap, Ratchet P-Clamps, and MP80 series edge-clip fixings for cable-management, identification, and strain-relief in harness assembly.

KUM sealed automotive connectors

Korean-origin KUM sealed male and female automotive housings — PB / PP / RS-series and KPP prefixes for Korean-OEM (Hyundai / Kia) harness programs, integrated into Aptiv's connection systems line card since the 2015 acquisition.

HV EV connectors — Intercable HVA / HVB / HV1M / HV2M

Intercable Automotive Solutions (Aptiv 2023) high-voltage battery and inverter connectors — HVA / HVB shielded HV interlock series, HV1M / HV2M pack-side terminations, and touch-proof orange-coded HV busbar interconnect for 400 V and 800 V EV architectures.

Automotive sensors — Delphi heritage

Delphi-heritage crankshaft position (CKP), camshaft position (CMP), MAP (manifold-absolute-pressure), MAF (mass-air-flow), and heated / wideband oxygen (HEGO / UEGO) sensors — original OE part-numbering still called out on GM, Ford, and Chrysler service manuals.

ADAS radar — 24 GHz / 77 GHz

Aptiv 24 GHz short-range and 77 GHz mid- / long-range radar sensors, RACam integrated radar-plus-camera modules, and MPC (Multi-Purpose Camera) forward-vision units for lane-keep, adaptive-cruise, AEB, and pedestrian-detection features on OE ADAS platforms.

In-vehicle networking — CAN, LIN, Ethernet

CAN / CAN-FD harness connectors, LIN single-wire networking, and Automotive Ethernet (MDI) media-dependent interfaces for zonal architectures — feeding Aptiv's Smart Vehicle Architecture (SVA) rollout across OEM programs.

Wind River software — VxWorks, Linux, Titanium

VxWorks RTOS, Wind River Linux, Wind River Studio, and Titanium Cloud board-support packages — the embedded-software layer Aptiv acquired in 2022 for $4.3B and now bundles with SVA edge compute. Note: Wind River is a software licensing business; PN-based hardware sourcing does not apply, but we support hardware BSP-target inquiries.

Legacy Packard Electric & Delco Electronics

Pre-1999 Packard Electric automotive-wiring terminals and Delco Electronics engine-management modules, sensors, and body-controller electronics — still required for classic-vehicle restoration, defense LRIP, and industrial equipment on decades-old service intervals.

Notable Aptiv part numbers we track

Hybrid Electronics quotes and sources the following Aptiv / Delphi parts across Metri-Pack, Weather-Pack, GT-series, Micro64, HellermannTyton, KUM, Intercable HV, and Delphi-heritage sensor families. Aptiv-inherited Packard Electric nomenclature uses the classic 8-digit format (e.g. 12047777, 12010973, 15326802) while HellermannTyton ships under its own 111-xxxxx / 114-xxxxx / 150-xxxxx article-number prefixes and T18R / T30R / T50R type codes. KUM parts ship under KPP / RS / PB prefixes. Contact us for the exact gender, pin count, plating, keying, seal color, and packaging variant you need.

Part number Family Description Quote
12047777Metri-Pack 150Metri-Pack 150 unsealed housing, tin, tanglessQuote
12047581Metri-Pack 150Metri-Pack 150 pin (male) crimp terminal, 18–20 AWGQuote
12065287Metri-Pack 150Metri-Pack 150 sealed connector housingQuote
12065171Metri-Pack 150Metri-Pack 150 sealed female housingQuote
12065425Metri-Pack 150Metri-Pack 150 10-way female connector, 14A maxQuote
12129155Metri-Pack 280Metri-Pack 280 black connector housingQuote
12129156Metri-Pack 280Metri-Pack 280 medium-gray connector housingQuote
12129492Metri-Pack 280Metri-Pack 280 sealed housingQuote
12160495Metri-Pack 280Metri-Pack 280 housing, sealedQuote
12162185Metri-Pack 280Metri-Pack 280 sealed automotive connectorQuote
12110845-LMetri-Pack 280Metri-Pack 280 female tangless terminal, 12–14 AWGQuote
12010996Weather-Pack1-way black male shroud sealed connectorQuote
12010973Weather-Pack2-way black male shroud sealed connectorQuote
12010717Weather-Pack3-way black male shroud sealed connectorQuote
12010974Weather-Pack4-way black male shroud sealed connector housingQuote
12010975Weather-Pack6-way black male shroud sealed connector, 20AQuote
12015791Weather-Pack1-way black female tower sealed connectorQuote
12015792Weather-Pack2-way black female tower sealed connectorQuote
12015793Weather-Pack3-way black female tower sealed connectorQuote
12015024Weather-Pack4-way black male shroud sealed connectorQuote
12015797Weather-Pack4-way female tower sealed connectorQuote
12020827Weather-Pack4-way black shroud sealed connector, PA6Quote
12020786Weather-Pack6-way sealed connectorQuote
12020830Weather-Pack4-way sealed connector, PA6Quote
12089040Weather-Pack terminalMale pin terminal, 20–18 AWG (WP-PIN2)Quote
12089307Weather-Pack terminalMale pin terminal, 24–22 AWG (WP-PIN1)Quote
12089188Weather-Pack terminalFemale socket terminal, 20–18 AWG (WP-SKT2)Quote
12020801Weather-Pack terminalFemale socket terminal, 22 AWG (WP-SKT1)Quote
12124580Weather-Pack terminalFemale socket terminal, 16–14 AWG (WP-SKT3)Quote
12124582Weather-Pack terminalMale pin terminal, 16–14 AWG (WP-PIN3)Quote
12124587Weather-Pack terminalMale pin terminal, 12 AWG (WP-PIN4)Quote
15326802GT 280GT 280 sealed connector housingQuote
15326827GT 280GT 280 8-way sealed housingQuote
15356827GT 280GT 280 sealed automotive connector, Mouser 829-15356827Quote
15305173GT 150GT 150 sealed connector housingQuote
15397579GT 280GT 280 black PBT 20% GF sealed housingQuote
15488667Micro-Pack / Micro6464-position gray connector assemblyQuote
100-00086Micro6456-way gray Micro64 sealed female connector (EFI)Quote
100-00084GT 280 / Micro6449-way black GT 280 / Micro64 sealed femaleQuote
100-00170Micro64 terminalMicro 0.64 female unsealed gold, 20–22 AWGQuote
12048074-LMetri-Pack terminalMetri-Pack terminal, tanglessQuote
12045773-LMetri-Pack terminalMetri-Pack tangless terminalQuote
12064736Packard heritagePackard Electric heritage terminalQuote
12047767-LMetri-Pack 150Metri-Pack 150 tangless terminalQuote
15304712-LGT-series terminalGT-series tangless crimp terminalQuote
54002200Delphi GT powerGT-series 2-way power connectorQuote
54001800Delphi GT powerGT-series 1.8mm power connectorQuote
T18R-PA66-BKHellermannTyton TY-RAPInside-serrated cable tie, 100 × 2.5mm, blackQuote
T30R-PA66-BKHellermannTyton TY-RAPInside-serrated cable tie, 150 × 3.5mm, blackQuote
T50R-PA66-BKHellermannTyton TY-RAPInside-serrated cable tie, 200 × 4.6mm, blackQuote
111-01289HellermannTyton kitT18R / T30R / T50R PA66 black cable tie kitQuote
111-01288HellermannTyton kitT18R / T30R / T50R PA66 natural cable tie kitQuote
114-01879HellermannTyton TY-RAPT18R-PA46-NA cable tie, 100 × 2.5mm, natural, 1000 pcsQuote
111-03259HellermannTyton TY-RAPT30R-PA66HS-NA heat-stabilized cable tie, 150mmQuote
150-55850HellermannTyton fixingT30RFT5 fixing tie for round hole, PA66HIRHS, blackQuote
RS220-03100KUM (Aptiv)KUM 1.5A automotive sealed connector, Korean OEMQuote
KPP011-98050KUM (Aptiv)KUM Korean automotive sealed connector, Hyundai/KiaQuote

Obsolete & hard-to-find Aptiv / Delphi parts

Aptiv's product line spans 125 years of Packard Electric wiring heritage, Delco Electronics semiconductor and sensor development, the 1999 Delphi Corporation GM spin-off, the 2005 Chapter 11 restructuring, the 2017 Aptiv / Delphi Technologies split, and successive acquisitions and divestitures (Elcon moved to Kyocera in 2019, HellermannTyton rebranded from IB Industries, Wind River joined 2022, Intercable in 2023). Many families were partially or fully discontinued when Aptiv consolidated tooling, moved to global GT-series geometry, or transitioned brand identities. Aftermarket harness houses, motorsports harness builders, defense LRIP programs, classic-vehicle restorers, and industrial equipment on decades-old service intervals still need continued access to legacy Delphi / Packard product. Hybrid Electronics sources these end-of-life families from OEM excess, contract-manufacturer surplus, and traceable secondary channels:

Send an RFQ with quantity, target date-code range, and any traceability requirements (COO, DPAS-rated, factory-sealed reel, AEC-Q200 window) — we return same-day availability from stock or an ETA from our sourcing network.

Aptiv quote & sourcing FAQ

What Aptiv products does Hybrid Electronics quote most often?

Metri-Pack 150 (12047 / 12065 series), Metri-Pack 280 (12129 / 12160 / 12162 series), Weather-Pack sealed housings (12010 / 12015 / 12020) and their WP-PIN / WP-SKT terminals, GT150 / GT280 (15326 / 15305 series), Micro64 high-density sealed connectors, and HellermannTyton TY-RAP T18R / T30R / T50R cable ties are our highest-volume Aptiv quote categories. Intercable HV1M / HV2M EV connectors, KUM Korean sealed automotive, and legacy Delphi Ducon / Elcon PowerBlok / Delco Electronics sensor product are steady low-volume sourcing lines for aftermarket harness houses, motorsports, defense, and classic-vehicle restoration.

Do you carry parts under their legacy Delphi and Packard Electric brand markings?

Yes. Because Aptiv's line card was assembled through 125 years of GM Packard Electric wiring heritage, Delco Electronics semiconductor development, the 1999 Delphi Corporation spin-off, the 2017 Aptiv / Delphi Technologies split, and successive acquisitions (KUM 2015, HellermannTyton 2015, nuTonomy 2017, Wind River 2022, Intercable 2023), many customers still specify parts by their pre-Aptiv brand or original 8-digit Packard PN format. We source original-marked legacy Delphi, Packard, and Delco Electronics stock where available and disclose repackaged / cross-referenced modern-format Aptiv stock on the quote so your incoming inspection process is not surprised.

Can Hybrid Electronics source Elcon PowerBlok connectors post the 2019 Kyocera transition?

Yes. The Elcon PowerBlok / PowerModul line moved from Delphi to Kyocera in 2019, but original Delphi-marked Elcon inventory still shows up on defense, industrial-drive, and battery-cabinet spares. We source both the legacy Delphi-Elcon stock and current Kyocera-Elcon production on RFQ — include your quantity, mating gender, current rating, and any COO / traceability requirements.

Are your Aptiv parts factory sealed and traceable?

Yes when available — most of our OEM-excess and CEM-surplus Aptiv / Delphi stock ships in original factory bags, reels, or trays with intact date codes, lot codes, and full traceability documentation. For downgraded stock we disclose condition (open bag, tested-pull, refurbished, remarked-inspected) on the quote. Customers requiring PPAP, IMDS, country-of-origin certification, AEC-Q200 date-code windows, or DPAS-rated delivery should note that on the RFQ.

How fast is your Aptiv quote turnaround?

Same day for parts in stock — typically within 2 hours during business hours (9am–6pm ET). Sourced quotes on out-of-stock parts return within 24–48 hours with an availability window. Email sales@hybridelectronics.com or call (407) 542-3995 to open an RFQ.

Is Hybrid Electronics an authorized Aptiv distributor?

No — we're an independent distributor and excess-inventory buyer sourcing from OEM excess, CEM surplus, and traceable secondary channels since 1995.

NEED APTIV?

Send us your Aptiv / Delphi RFQ — part number, quantity, target date code — and we'll come back same day with availability from stock or an ETA from our sourcing network.

Or call (407) 542-3995

Same-day Aptiv quotes

Submit an RFQ Other A brands

Hybrid Electronics is an independent distributor — not an authorized Aptiv distributor. All trademarks belong to Aptiv PLC.