Manufacturer profile
Hybrid Electronics sources Analog Devices data converters, amplifiers, µModule and Silent Switcher power, RF and microwave ICs, MEMS inertial sensors, SHARC and Blackfin processors, and iCoupler isolation — plus the full Linear Technology (LT/LTC/LTM) and Maxim Integrated (MAX, DS-series, 1-Wire) legacy portfolios ADI absorbed via acquisition. Same-day quotes, traceable stock, and OEM-excess sourcing since 1995.
Analog Devices, Inc. (ADI), founded in 1965 and headquartered in Wilmington, Massachusetts, is one of the largest analog, mixed-signal, and DSP semiconductor companies in the world. Its portfolio spans precision and high-speed data converters (AD7xxx sigma-delta, AD4xxx SAR, AD9xxx GSPS ADC/DAC), op amps and instrumentation amplifiers (AD8xxx, OP-series, LT1xxx, LT6xxx), power management (LTC/LTM µModule regulators, Silent Switcher, MAX15xxx/MAX17xxx), RF and microwave (HMC-series Hittite legacy, ADRV9xxx integrated transceivers, ADRF-series mixers and demodulators), MEMS inertial sensors (ADXL accelerometers, ADIS IMUs), SHARC and Blackfin+ processors, iCoupler digital isolators, and precision voltage references. ADI's 2017 acquisition of Linear Technology and 2021 acquisition of Maxim Integrated made it the umbrella brand for three of the industry's most respected analog franchises — alongside Hittite Microwave, which ADI acquired in 2014.
Hybrid Electronics has quoted Analog Devices, Linear Technology, Maxim, and Hittite parts since 1995 — long before the acquisitions consolidated them. We support customers who need obsolete LT1xxx op amps and LTC1xxx power ICs for locked-BOM boards, legacy Maxim DS-series RTCs (DS1307, DS3231) and MAX232/MAX3232 line drivers for industrial control refresh, discontinued HMC Hittite parts for radar and satcom production, hard-to-find ADXL and ADIS MEMS sensors on allocation, and ADSP-BF Blackfin or SHARC DSPs on 40+ week ADI lead times. When authorized distributors show zero stock, we source from OEM excess, CEM surplus, and traceable secondary channels.
Free downloads of Analog Devices product catalogs, short-form guides, and datasheets from Hybrid Electronics' archive.
Our line card spans ADI's full analog, mixed-signal, RF, sensor, and DSP portfolio — plus the complete Linear Technology and Maxim Integrated legacy brands still shipping across industrial, medical, defense, automotive, and instrumentation designs.
Precision SAR & sigma-delta ADCs (AD4xxx, AD7xxx families — AD7124-4, AD4630-24), high-speed GSPS ADCs (AD9208 3 GSPS, AD9081 MxFE), and nanoDAC+ / RF-DACs (AD5686R quad 16-bit, AD9xxx GSPS DACs). For instrumentation, medical imaging, RF sampling, software-defined radio, and industrial process control.
Op amps (AD8xxx, OP07 / OP-series, LT1013, LT1014, LT6015 over-the-top), precision instrumentation amps (AD8422, AD620-series), biopotential front ends (AD8232 ECG/EMG), and comparators. Legacy Linear Tech LT1xxx and LT2xxx op amps quoted from stock and OEM excess.
LTM µModule regulators (LTM4700 100A, LTM8065 Silent Switcher), LTC buck / boost / buck-boost (LTC3618 DDR, LTC3260 charge pump), Maxim step-down converters (MAX15062, MAX17xxx), and fuel gauges (MAX17262 ModelGauge m5). Silent Switcher µModule and Power by Linear™ heritage lines for low-noise, high-density power.
ADRV integrated transceivers (ADRV9026 quad 75 MHz–6 GHz, ADRV9009), HMC-series Hittite-legacy attenuators, VGAs, amplifiers and mixers (HMC624A DC–6 GHz attenuator, HMC629A DC–10 GHz, HMC788A driver amp), and ADRF-series mixers, demodulators, and detectors (ADRF6820). For 5G, base stations, radar, satcom, and test & measurement.
ADXL accelerometers (ADXL343 / ADXL345 up to ±16 g, ADXL362 micropower, ADXL375 ±200 g shock), ADIS-series IMUs (ADIS16505 precision, ADIS16460 6DOF), and ADT temperature sensors (ADT7420 ±0.25°C I²C). Legacy ADXL335/ADXL356 also sourced for fielded industrial and consumer designs.
SHARC / SHARC+ (ADSP-21489 450 MHz floating-point, ADSP-SC584 dual-core SHARC+ + Arm Cortex-A5), and legacy Blackfin / Blackfin+ (ADSP-BF706, ADSP-BF592, ADSP-BF533/BF561 obsolete). For audio, industrial control, motor drives, and factory automation.
ADuM digital isolators (ADuM1201 dual channel, ADuM3160 USB), isolated transceivers (ADM3251E RS-232, ADM2582E RS-485), plus CAN/LIN/RS-485 transceivers. Maxim-legacy MAX3232 / MAX232 line drivers still specified across industrial and medical instrumentation.
ADR-series ultra-low-noise, high-accuracy references (ADR4525 2.5 V, ADR4550 5 V), and LT-series Linear Tech references (LT1461, LT1019, LT1236). For ADC/DAC reference, precision measurement, and metrology.
DS-series real-time clocks (DS1307 I²C RTC, DS3231 TCXO-integrated RTC), 1-Wire devices (DS18B20 temperature, DS2431 EEPROM), MAX7219 8-digit LED display driver, and MAX232/MAX3232 line drivers. All Maxim heritage now under the ADI umbrella.
Hybrid Electronics quotes and sources the following Analog Devices, Linear Technology, Maxim Integrated, and Hittite parts across data converters, amplifiers,
power, RF, sensors, and DSPs. ADI uses ADxxxx / ADSPxxxx / ADuMxxxx / ADRVxxxx prefixes; Linear Tech uses
LT, LTC, and LTM; Maxim uses MAX and DS; Hittite uses HMC. Package and grade suffixes
(BCPZ, ARUZ, LP4E, IUJZ, TR/REEL) available — contact us for exact PN, temperature grade, and packaging.
| Part number | Family | Description | Quote |
|---|---|---|---|
| AD7124-4 | Precision ADC | 4-Channel 24-Bit sigma-delta ADC with PGA & reference | Quote |
| AD4630-24 | Precision SAR ADC | 24-Bit, 2 MSPS dual-channel simultaneous SAR ADC | Quote |
| AD9208 | High-Speed ADC | 14-Bit, 3 GSPS dual ADC, JESD204B, direct RF sampling | Quote |
| AD9081 | MxFE Transceiver | Quad 16-Bit 12 GSPS RF-DAC + Quad 12-Bit 4 GSPS RF-ADC | Quote |
| AD5686R | nanoDAC+ | Quad 16-Bit SPI DAC with 2.5 V on-chip reference | Quote |
| AD8232 | Biopotential AFE | Single-lead heart-rate monitor / ECG front end | Quote |
| AD8422 | In-Amp | Precision rail-to-rail instrumentation amplifier | Quote |
| OP07 | Op Amp | Ultralow offset voltage precision op amp (industry standard) | Quote |
| LT1013 | Op Amp — LT legacy | Dual precision op amp, single-supply, 8-pin standard | Quote |
| LT6015 | Op Amp | 3.2 MHz over-the-top precision op amp, 76 V input CM range | Quote |
| LTC3260 | Charge Pump | Low-noise dual-supply inverting charge pump + LDOs | Quote |
| LTC3618 | Buck — LT | Dual 4 MHz ±3 A synchronous buck for DDR termination | Quote |
| LTM4700 | µModule Regulator | Dual 50 A / Single 100 A µModule with PMBus digital PMBus | Quote |
| LTM8065 | Silent Switcher µModule | 40 V, 2.5 A Silent Switcher µModule buck regulator | Quote |
| MAX15062 | Buck — Maxim | 60 V, 300 mA synchronous step-down DC-DC converter | Quote |
| MAX17262 | Fuel Gauge — Maxim | 5.2 µA 1-cell fuel gauge, ModelGauge m5 EZ, internal Rsense | Quote |
| HMC624ALP4E | RF Attenuator | 6-bit 0.5 dB LSB digital attenuator DC–6 GHz, GaAs | Quote |
| HMC629ALP4E | RF Attenuator | 3 dB LSB 4-bit GaAs digital attenuator DC–10 GHz | Quote |
| HMC788A | RF Amplifier | 10 MHz–10 GHz driver amp, 14 dB gain, +33 dBm OIP3 | Quote |
| ADRV9026 | RF Transceiver | Quad-channel wideband RF transceiver, 75 MHz–6 GHz, 200 MHz BW | Quote |
| ADRF6820 | Quadrature Demod | 695–2700 MHz quadrature demodulator w/ integrated frac-N PLL | Quote |
| ADXL345 | MEMS Accelerometer | 3-axis ±2/±4/±8/±16 g digital accelerometer, I²C/SPI | Quote |
| ADXL343 | MEMS Accelerometer | 3-axis digital accelerometer, ADXL345 replacement / new-design | Quote |
| ADXL362 | MEMS Accelerometer | Micropower 3-axis ±2/±4/±8 g accelerometer, ~1.8 µA @ 100 Hz | Quote |
| ADXL375 | MEMS Shock Sensor | 3-axis ±200 g digital shock accelerometer, SPI/I²C | Quote |
| ADIS16505-2BMLZ | MEMS IMU | Precision 6DOF MEMS IMU, ±500°/s gyro, ±8 g accel, BGA | Quote |
| ADIS16460 | MEMS IMU | Compact 6DOF IMU, ±100°/s gyro, ±5 g accel, SPI | Quote |
| ADT7420 | Temp Sensor | ±0.25°C 16-bit digital I²C temperature sensor | Quote |
| ADSP-21489KSWZ | SHARC DSP | 450 MHz SHARC 32-/40-bit floating-point audio DSP | Quote |
| ADSP-SC584 | SHARC+ SoC | Dual-core SHARC+ + Arm Cortex-A5, DDR, Ethernet, USB | Quote |
| ADSP-BF706 | Blackfin+ | 400 MHz Blackfin+ embedded processor, 1 MB L2 SRAM | Quote |
| ADuM1201 | iCoupler Isolator | Dual-channel digital isolator (1/1 directionality), 2.5 kV | Quote |
| ADuM3160 | USB Isolator | Full/low-speed 2.5 kV isolated USB 2.0 digital isolator | Quote |
| ADM3251E | Isolated RS-232 | 2.5 kV isolated single-channel RS-232 transceiver, isoPower | Quote |
| MAX3232 | RS-232 — Maxim | 3.0–5.5 V, 1 Mbps true RS-232 transceiver | Quote |
| ADR4525 | Voltage Reference | Ultra-low-noise 2.5 V reference, 2 ppm/°C max | Quote |
| LT1461 | Reference — LT | Micropower precision LDO series voltage reference family | Quote |
| DS1307 | RTC — Maxim | 64x8 serial I²C real-time clock with 56-byte NV SRAM | Quote |
| DS3231 | RTC/TCXO — Maxim | Extremely accurate I²C RTC with integrated TCXO & crystal | Quote |
| MAX7219 | LED Driver — Maxim | 8-digit LED display driver, serial interface | Quote |
Additional Analog Devices, Linear Technology, Maxim and Hittite parts — including full HMC mixer/PLL/VCO catalog, AD9xxx GSPS ADC/DAC roadmap, LTC/LTM µModule extension products (LTM4644, LTM4650, LTM8003), MAX30xxx biosensors, DS-1-Wire family, and ADSP-SC57x/SC58x SoC variants — also quoted on request. ITAR/EAR export screening applied to all restricted RF and transceiver parts.
Analog Devices — and the Linear Technology, Maxim, and Hittite brands ADI absorbed — ship into instrumentation, medical, defense, industrial control, audio, and communications designs that stay in production for 10 to 30 years. When ADI moves a family to Not Recommended for New Design or Last-Time-Buy, or when channel lead times stretch past 40 weeks, Hybrid Electronics sources continued supply from OEM excess, contract-manufacturer surplus, and traceable secondary channels:
Send an RFQ with quantity, target date code range, and any traceability requirements (COO, MSL, factory sealed, DPAS) — we return same-day availability from stock or an ETA from our sourcing network.
Precision ADCs (AD7xxx, AD4xxx) and instrumentation amps (AD8xxx) for industrial and medical builds, LTC/LTM µModule power for FPGA-adjacent rails, Maxim DS-series RTCs and MAX3232-family line drivers for embedded refresh, and Hittite HMC attenuators and amplifiers for RF and satcom production are our highest-volume quote categories. ADIS IMUs, ADXL accelerometers, and Blackfin / SHARC DSPs on ADI allocation are also frequent inquiries.
Yes — on an inquiry basis. High-value ADI parts like the AD9081 MxFE, ADRV9026 quad transceiver, and LTM4700 100 A µModule frequently show 40+ week authorized-channel lead times. We quote per unit against real-time supply from OEM excess and channel partners rather than holding constant stock. Include target quantity, region, temperature grade, and required packaging (tape & reel, tray) and we return an availability window and quoted price.
Yes — ADI acquired Hittite Microwave (2014), Linear Technology (2017), and Maxim Integrated (2021). We source the full LT / LTC / LTM Linear Tech portfolio, Maxim MAX / DS / 1-Wire portfolio, and Hittite HMC RF portfolio. Original brand markings, ADI post-acquisition markings, and legacy die-code date ranges are all quoted — specify what you need on the RFQ.
Yes when available — most of our OEM-excess and CEM-surplus ADI, Linear Tech, and Maxim stock is factory sealed with original date codes and full traceability documentation. For downgraded stock we disclose condition (open reel, tested-pull, refurbished) on the quote. Customers requiring MSL data, COO, DPAS-rated delivery, or ISO/AS9120 traceability documentation should note it on the RFQ.
Yes — high-performance ADI RF transceivers, GSPS ADCs, and select Hittite HMC parts are subject to U.S. export controls under EAR and, in some cases, ITAR. Hybrid Electronics screens every export order for end-use, end-user, and destination compliance under EAR §744, and we do not sell restricted parts into embargoed destinations or to denied parties. AES/ITN filing is included on qualified export shipments.
No — Hybrid Electronics is an independent distributor and excess-inventory buyer, not an ADI-authorized distributor. We source Analog Devices, Linear Technology, Maxim Integrated, and Hittite parts from OEM excess, CEM surplus, and traceable secondary channels since 1995. For factory-warranted current-production orders, work with an ADI-authorized global distributor. For obsolete, hard-to-find, or allocated parts where authorized channels show no stock, Hybrid Electronics is a proven independent source.
NEED ANALOG DEVICES?
Send us your Analog Devices, Linear Tech, Maxim, or Hittite RFQ — part number, quantity, target date code — and we'll come back same day with availability from stock or an ETA from our sourcing network.
Or call (407) 542-3995
Hybrid Electronics is an independent distributor — not an authorized Analog Devices distributor. All trademarks belong to Analog Devices, Inc., including the Linear Technology, Maxim Integrated, and Hittite Microwave heritage brands.